Session Index

Optical Engineering

Optical Engineering III-1
Friday, Dec. 6, 2019  13:30-15:15
Presider: Prof. Chuen-Lin Tien、Dr. Bo-Yi Chen
Room: Electrical Engineering Building EE203 (2F)
Notes:
13:30 - 14:00 Manuscript ID.  0178
Paper No.  2019-FRI-S0503-I001
Invited Speaker:
Pin Han

Spatial-Spectral correspondence relationship and its applications
HSUN-CHING HSU;JUNHONG WENG;Pin Han

In this work the possibility of finding similar effects for a circular symmetric object, for one with amplitude transmittance J0 (zero-order Bessel function of the first kind) is discussed. The transfer function approach is used, and conditions for image reconstruction and spectra restoration in the near field are obtained.

 
 
14:00 - 14:15 Manuscript ID.  0388
Paper No.  2019-FRI-S0503-O001
Mao-Chieh Juan
Study of lighting fixture with different illumination angles on lighting quality
Zhi-Ting Ye;Mao-Chieh Juan;Yi-Ning Chen;Chun-Hung Lai;Yu-Jyun Chen

This paper study a model for the analysis of the unified glare rating (UGR) in classroom. This paper is to provide methods to construct model design light fixture in the classroom. After the simulation, the beam angle 90° is the best uniformity and UGR is less than 19.

 
 
14:15 - 14:30 Manuscript ID.  0490
Paper No.  2019-FRI-S0503-O002
Yu-Chieh Huang
Ag/n-Si Schottky Photodetector for Near Infrared ranges
Vivek Parimi;Yu-Chieh Huang;Ching-Fuh Lin

In this paper, we develop a simple and cost-effective way to characterize the Ag/n-Si based Schottky photodetector. Based on the model, the barrier height can be obtained and well corresponds to the cutoff wavelength around 1550 nm, which is suitable for optical communication applications.

 
 
14:30 - 14:45 Manuscript ID.  0428
Paper No.  2019-FRI-S0503-O003
TZU-CHENG HUANG
3D modeling and navigation of agricultural unmanned ground vehicle with binocular vision
TZU-CHENG HUANG

Real-time appearance-based mapping (RTAB-Map) is an algorithm for real-time location and 3D map construction. Simultaneous localization and mapping (SLAM) can be performed after receiving depth camera, RGB-D camera, and IMU information. Then use the map to perform path planning and navigation.

 
 
14:45 - 15:00 Manuscript ID.  0331
Paper No.  2019-FRI-S0503-O004
Chaohsien Chen
Study of Optical Projection Systems with LED Rollers
Chaohsien Chen

Modern projectors include four major parts: lamps, illumination optics, imaging chips, and optical lenses. The power efficiency is normally only about 17%, most of which is wasted by the illumination optics and imaging chips. We propose projector designs with rolling LED rollers to replace lamps, illumination optics, and imaging chips.

 
 
15:00 - 15:15 Manuscript ID.  0248
Paper No.  2019-FRI-S0503-O005
Hsueh-Tao Chou
The Research of Localized Surface Plasmon Resonance HbA1c Biosensor Optimized by Using Polydopamine/AuNPs/AuNPs/TiO2 nanocomposite Films
Hsueh-Tao Chou;You-Lun Deng;Wei-Hao Huang;Jing-Hua Lu;Tin-Yao Kao;Hsiu-Ci Li;Tien-Ming Wu

In this study, the polydopamine (PDA) deposited on gold nanoparticles (AuNPs)
modified Titanium dioxide (TiO2) nano-composite film on indium tin oxide (ITO) glass is
used to detect glucose, and the research of optical fiber sensor system applied for LSPR
biosensor for detecting different environment refractive indices